From Vaporesso comes the Target 75w VTC Kit that features a no spitting tank with a cCELL coil. The unique cCELL coil uses true ceramic coil without wicks, giving it a longer lifecycle. Essentially the heating coil and ceramic are made together to form the coil unit. The VTC mod itself has a pretty unique design and has output wattage of 5w to 75w. It also has temperature control functionality with adjustable temperature range of 150 to 315 degrees Centigrade or 300 to 600 degrees Fahrenheit. It uses a single 18650 battery (sold separately) and has an OLED display.
- Target tank with cCELL true ceramic coil
- Variable wattage box mod (5w - 75w)
- Temperature control (100-315 degrees Centigrade, 300-600 degrees Fahrenheit)
- Zinc alloy and stainless steel construction
- Uses single 18650 battery (sold seaparately)
- 1x Target tank with cCELL coil (0.9 ohm preinstalled)
- 1x Target 75w box mod
- 1x Extra replacement Ni200 cCELL nickel coil (0.2 ohm)
- 1x USB cable
- 1x User Manual
TrustFire Multifunctional Charger
Output: 4.2V 500mA
Two individual charging channels with dedicated LED status indicator for each channel
Charges one or two batteries at a time, at your choice - Works worldwide (AC 100~240V)
Charges 3.6V 10430, 10440, 14500, 16340, 18350, 17670, 18500 and 18650 lithium batteries
Use Rechargeable Batteries or With PCB Batteries. Other types of batteries may cause personal injury. Do NOT leave batteries charging unattended/overnight!
Input 1: 110-240V /50~60HZ
Input 2: DC 12V 500mA
Output: 4.2V 500mA
Two colors: White / Black
Maximum Output Current: 500mA
The AWT 18650 high-drain 40A battery is perfect for mechanical mods and sub-ohm builds. The lithium-ion battery has a capacity of 3000mAh and is manufactured by AWT with a cycle life of over 1,000.
Dimensions: 65.05mm (L) x 18.2mm (D)
Nominal Capacity: 3000mAh
Nominal Voltage: 3.7V
Continuous Discharge Current: 35A
Discharge Voltage: 2.5V
Safe chemistry LiMN means reduced risk of venting with flame or explosion. Due to the safety inherent in IMR safe chemistry batteries there is no protection circuitry added or built in. This provides a slightly shorter battery length to enable a good fit in most mods.
To ensure longevity, it is not recommended to allow the battery to discharge below 2.5V.
Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.2 volts.