Frequently bought together

Kanger T3S BCC Clearomizer

Availability: In Stock
Brand: Kanger
Product Code: KGR-T3S-BCC
Reward Points: 5

Available Options

* Color:

Kanger T3S BCC Clearomizer

The new Kanger T3S ego BCC (bottom coil clearomizer is a 2.4ml tank system with an easy to replace atomizer coil. The T3S has similar characteristics and traits as the Kanger eVod. Previously, the Kanger T3 BCC design was a 1-piece replaceable coil and base. The clearomizer will be filled from the bottom by unscrewing the easy grip base and filling to capacity accordingly to the graduated marking on the transparent tube. The T3S is best compatible with Ego series type batteries as well as certain mods that have a wide enough spacing to accomodate the T3S.


  • 1 x 2.4ml Tank Assembly with attached Mouthpiece.
  • 1 x Atomizer head @ 2.5ohm  +/- .2ohm.
  • 1 x T3s Base

Note: The top piece does not detach and drip tips will not be comaptible.

Colors clear, black, red, green, yellow, purple, blue
Physical Specifications
Absorb Type BCC (bottom coil clearomizer) wick
Capacity 2.4ml
Dimensions L: 79.5mm x D: 15mm
Thread Fitment Ego series and most 510 threading
Weight 25g
Rating 1.8ohm/2.2ohm/2.5ohm

How to fill the T3s:

The top mouthpiece is not detachable. By unscrewing the base of the BCC, you fill the liquid into the inner side of the tube, avoiding any liquid into the center metal tube. The metal tube is the air hole which can cause gurgling should any liquid were to get in the metal tubing.

How to replace the T3s coil:
1. Remove the base, unscrew the coil
2. Screw the new coil into the base
3. Screw the base on the T3s


  • The original Kanger T3 and MT3 base are compatible with the new T3S/MT3S. Both versions are interchangeable.
  • Currently MT3S and T3S use the same replaceable coil head. You can use T3S/MT3S coil heads on eVods and Protank, however the eVod or ProTank coil heads are not compatible with MT3S or T3S.

Also Bought