The Buster mod minimizes voltage drop by integrating a hybrid style top cap allowing the atomizer to directly contact the battery. An included extension ring can accommodate 18650 batteries.
The Buster is made from stainless steel to further improve performance.
Additionally, it features a stainless steel bottom contact pin and a recessed magnetic firing button.
This full stainless steel mod includes ONLY the engraved Buster logo.
- 18500 or 18650 Compatible
- Hybrid Top Cap w/ 2 Air Holes
- 4 Air Hole in Tube
- Copper Bottom Contact
- Engraved Buster Logo Only
- Recessed Magnetiic Firing Button
- Full Stainless Steel
Note: please DO NOT stack batteries as this is a mechanical mod with no circuitry, you will effectively double your voltage which can and will destroy attached devices. Also, have a clear knowledge of properly using mechanical mods.
Inspired by the Mutation X RDA, Cigreen decided there was some improvements and enhancements to the RDA that will indulge enthusiasts with the popular atomizer. The V2 is a redesigned top cap that has been improved with a removeable wide bore delrin drip tip, and a blade style adjustable air flow cut out. Tired of using the wide bore tip? Replace the tip with the 510 delrin adaptor to use your favorite drip tip. The 9 way adjustable air hole (total of 18 holes) provides a multitude of air draw variations. The four post design allows standard dual or quad coil configurations, deep juice well for liquid absorption, and the large post holes allow thicker gauge wire builds. Dual medical grade o-rings are attached on the base and the copper contact pin rests in between the 510 threaded connection for a superb performing atomizer.
- 22mm diameter
- Stainless steel
- Copper contact pin
- Wide bore delrin tip
- Delrin 510 adaptor for standard 510 drip tips
- 4 post design
- Phillips screws
- Large post holes
- High temperature insulator
- Deep juice well
- 9 hole air hole adjustability (total 18 holes)
- 1 Piece Wide bore tip top cap
- 1 x Cigreen X RDA
- 1 x Wide bore drip tip
- 1 x Delrin 510 adaptor
- Extra O-Ring
- Replacement screws
- 2 x Pre-built coils
Note: It is strongly recommended to thoroughly wash & clean the atomizer. When using rebuildable atomizers, please have a clear knowledge and understanding of properly using these products.