The Praxis clone is hybrid direct connect type mechanical mod. This particular unit has a very small form factor with an overall height of 82mm. The hybrid top cap allows the battery to directly contact the atomizer, minimizing voltage drop.
The most unique feature of the Praxis is its dual action firing switch. This switch works by first sliding it in then pushing it up. This Praxis is a great choice for those looking for a compact, hard hitting mod.
- Hybrid Top Cap
- Unique dual action firing switch
- Uses 1 x 18650 Battery
- 22mm Diameter
Note: please DO NOT stack batteries as this is a mechanical mod with no circuitry, you will effectively double your voltage which can and will destroy attached devices. Also, have a clear knowledge of properly using mechanical mods.
You can say that the CLT RDA (rebuildable drip atomizer), created by Infinite, is a hybrid version of all existing components of the latest atomizers on the market all into one. Vivid Smoke, and current vapers may quickly recognize the top cap knurl design derived from the Taifun rebuidable. Next, you'll see the heat sink machined on the upper top cap piece and the matching drip tip, which allows to dissipate heat much like the Tobh. Remove the upper cap revealing the underside dome chamber top design, similar to the Magma RDA, creating better flavor production. Notice the cyclops slit adjustable air holes and removeable center stainless steel window. The linear slits adds a stylish look similar to the Stillare RDA. Finally, once the base is revealed, the quad terminal posts resembles the Helios atomizer that is equipped with phillips screws and approximately 1.5mm post holes to easily insert thick wires. To add the finishing touch, the 510 threaded connection is backed by a copper plated center pin for maximum conductivity. Each CLT atomizer includes wick/wire, extra o-rings, tool, a customized matching drip tip, and laser engraved with logos.
- 303 Stainless steel w/black finish
- Fin-like design to diffuse heat on top cap and drip tip
- Welded/built-in one piece posts
- 2 x cyclops style rotatable air slits
- SS Phillips screws on posts
- Tri-pole with quad-pole functionality (quad terminal)
- 20mm deck well
- Post holes approx. 1.5mm
- 22mm diameter
- Copper plated center pin
- 510 threading
- Dome chamber top design
- Knurled top cap - easy to grip and remove
- CLT atomizer
- Drip Tip
- Extra o-rings
- Wooly fabric line gift box
Note: It is strongly recommended to thoroughly wash & clean the atomizer. When using rebuildable atomizers, please have a clear knowledge and understanding of properly using these products.